Liebherr LTM 1045-3.1 specifications
| Specifications for 45t Liebherr Telescopic crane LTM 1045-3.1 | |
| Max. capacity: 45 t at 3 m | Max. loadmoment: - tm |
| Axles: 3 | Total weight: 36 t |
| Booms: | |
| Telescopic boom: 10,3-34 m | Boom sections: 4 |
| Boom luffing up to: 81° in 46 seconds | Boom telescoping: 10,3-34 m in 80 seconds |
| Superlift: - | Intermediate sections: - m |
| Folding jib: 9,2/16 m offsettable at angle 0/20/40° | |
| Fixed jib: - m offsettable at angle -° | Luffing jib: - m |
| Main boom foot pin horizontal offset X: -2740 mm |
Main boom foot pin vertical offset Y: - mm |
| Max. slewing speed: 2 rpm | |
| Max. line speed: 120 m/min | Max. line pull: 45 kN |
| Dimensions: | |
| Total length: 11210 mm | Tail swing: 3450 mm |
| Carrier length: 9110 mm | Width: 2540 mm |
| Outer turning radius : 9530 mm | Inner turning radius: 4560 mm |
| Turning radius boom head: 10200 mm | Turning radius folding jib: 10690 mm |
| Outrigger base: 7169 x 6400 mm | Reduced outrigger base: 7169 x 4500 mm |
| Crawler track width: - mm | Crawler plate width: - mm |
| Drives & Transmission: | |
| Carrier engine: LH D 926 TI-E A5 | Power/Weight-Ratio: 7.50 kW/t |
| Power: 270 kW / 367 PS | Max. torque: 1650 Nm 1200 rpm |
| Transmission: ZF 12-Gang-Schaltgetriebe | Gears: 12+1 (Forward + reverse) |
| Max. speed: 75 km/h | Gradeability: 60 % |
| Drive / Steering (standard): 6x4x6 | Drive / Steering (option): 6x6x6 |
| Tyres (standard): 14.00 R25 | Tyres (option): 16.00 R25 |
| Superstructure engine: - | |
| Power: - kW / - PS | Max. torque: - Nm at - rpm |
| Counterweight: | |
| Derrick mast: - m | Radius A-frame: - mm |
| Max. counterweight: 7 t | Central ballast (Crawler cranes): - t |
| All crane specifications given are for reference only. This is no sales offer! | Brochure version: 06/04 |