Liebherr LTM 1050/1 specifications
| Specifications for 50t Liebherr Telescopic crane LTM 1050/1 | |
| Max. capacity: 50 t at 3 m | Max. loadmoment: 176 tm |
| Axles: 3 | Total weight: 36 t |
| Booms: | |
| Telescopic boom: 10,5-40 m | Boom sections: 5 |
| Boom luffing up to: 84,5° in 56 seconds | Boom telescoping: 10,5-40 m in 90 seconds |
| Superlift: - | Intermediate sections: - m |
| Folding jib: 9,6/16 m offsettable at angle 0/15/30° | |
| Fixed jib: - m offsettable at angle -° | Luffing jib: - m |
| Main boom foot pin horizontal offset X: -2510 mm |
Main boom foot pin vertical offset Y: - mm |
| Max. slewing speed: 2,2 rpm | |
| Max. line speed: 120 m/min | Max. line pull: 45 kN |
| Dimensions: | |
| Total length: 11710 mm | Tail swing: 3510 mm |
| Carrier length: 8706 mm | Width: 2500 mm |
| Outer turning radius : 10820 mm | Inner turning radius: 5795 mm |
| Turning radius boom head: 11910 mm | Turning radius folding jib: 12430 mm |
| Outrigger base: 7141 x 6300 mm | Reduced outrigger base: 7141 x 4310 mm |
| Crawler track width: - mm | Crawler plate width: - mm |
| Drives & Transmission: | |
| Carrier engine: LH D 926 TI | Power/Weight-Ratio: 6.39 kW/t |
| Power: 230 kW / 312 PS | Max. torque: 1150 Nm 1400 rpm |
| Transmission: Lastschalt-Wendegetriebe | Gears: 6+2 (Forward + reverse) |
| Max. speed: 70 km/h | Gradeability: 55 % |
| Drive / Steering (standard): 6x4x6 | Drive / Steering (option): 6x6x6 |
| Tyres (standard): 14.00 R25 | Tyres (option): 16.00 R25 - 20.5 R25 |
| Superstructure engine: - | |
| Power: - kW / - PS | Max. torque: - Nm at - rpm |
| Counterweight: | |
| Derrick mast: - m | Radius A-frame: - mm |
| Max. counterweight: 9,7 t | Central ballast (Crawler cranes): - t |
| All crane specifications given are for reference only. This is no sales offer! | Brochure version: 06/94 |