Terex-Demag TC 2800-1 specifications
| Specifications for 600t Lattice boom crane Terex-Demag TC 2800-1 | |
| Max. capacity:600 t at 6 m | Max. loadmoment: - tm |
| Axles: 8 | Total weight: 92 t |
| Booms: | |
| Main boom: 24-138 m | Boom erecting up to: -° in - seconds |
| Fixed jib: 12-36 m offsettable at angle 10/30° | Luffing jib: 24-96 m |
| Main boom foot pin horizontal offset X: - mm |
Main boom foot pin vertical offset Y: 3140 mm |
| Max. slewing speed: 0,7 rpm | |
| Max. line speed: 120 m/min | Max. line pull: 158 kN |
| Dimensions: | |
| Total length: 17950 mm | Tail swing: 8000 mm |
| Carrier length: 17950 mm | Width: 3000 mm |
| Outer turning radius : 16100 mm | Inner turning radius: 8600 mm |
| Turning radius boom head: - mm | Turning radius folding jib: - mm |
| Outrigger base: 14000 x 14000 mm | Reduced outrigger base: - mm |
| Drives & Transmission: | |
| Carrier engine: MB OM 502 LA | Power/Weight-Ratio:4.57 kW/t |
| Power: 420 kW / 571 PS | Max. torque: 2700 Nm 1100 rpm |
| Transmission: Allison Automatik CLBT 755 | Gears: - (Forward + reverse) |
| Max. speed: 62 km/h | Gradeability: - % |
| Drive / Steering (standard): 16x8x16 | Drive / Steering (option): - |
| Tyres (standard): 14.00 R25 | Tyres (option): - |
| Superstructure engine: MB OM 502 LA | |
| Power: 380 kW / 516 PS | Max. torque: 2400 Nm at 1080 rpm |
| Counterweight: | |
| Derrick mast: 30 m | Radius A-frame: 9600 mm |
| Max. counterweight: 200 t | Derrick counterweight tray: 300 t |
| Derrick counterweight carrier: - t | Central ballast: - t |
| All crane specifications given are for reference only. This is no sales offer! | Brochure version: 02/04 |