Liebherr LI 1010 specifications
| Specifications for 10t Liebherr Industrial crane LI 1010 | |
| Max. capacity: 10 t at 2 m | Max. loadmoment: 25 tm |
| Axles: 2 | Total weight: 14,4 t |
| Booms: | |
| Telescopic boom: 5,2-12 m | Boom sections: 3 |
| Boom luffing up to: -° in 13 seconds | Boom telescoping: 5,2-12 m in 32 seconds |
| Superlift: - | Intermediate sections: - m |
| Folding jib: 5,5 m offsettable at angle 5° | |
| Fixed jib: - m offsettable at angle -° | Luffing jib: - m |
| Main boom foot pin horizontal offset X: - mm |
Main boom foot pin vertical offset Y: - mm |
| Max. slewing speed: 3 rpm | |
| Max. line speed: 65 m/min | Max. line pull: - kN |
| Dimensions: | |
| Total length: 6940 mm | Tail swing: - mm |
| Carrier length: 4570 mm | Width: 2440 mm |
| Outer turning radius : - mm | Inner turning radius: - mm |
| Turning radius boom head: - mm | Turning radius folding jib: - mm |
| Outrigger base: 3950 x 3000 mm | Reduced outrigger base: - mm |
| Crawler track width: - mm | Crawler plate width: - mm |
| Drives & Transmission: | |
| Carrier engine: Deutz F 3 L 912 | Power/Weight-Ratio: 4.14 kW/t |
| Power: 58 kW / - PS | Max. torque: - Nm 1600 rpm |
| Transmission: Hurth Schaltgetriebe | Gears: 4+4 (Forward + reverse) |
| Max. speed: 25 km/h | Gradeability: - % |
| Drive / Steering (standard): 4x2x2 | Drive / Steering (option): - |
| Tyres (standard): 9.00x20 PR14 | Tyres (option): - |
| Superstructure engine: - | |
| Power: - kW / - PS | Max. torque: - Nm at - rpm |
| Counterweight: | |
| Derrick mast: - m | Radius A-frame: - mm |
| Max. counterweight: 1,5 t | Central ballast (Crawler cranes): - t |
| All crane specifications given are for reference only. This is no sales offer! | Brochure version: 11/75 |