Liebherr LTM 1050-3.1 specifications
| Specifications for 50t Liebherr Telescopic crane LTM 1050-3.1 | |
| Max. capacity: 50 t at 3 m | Max. loadmoment: - tm |
| Axles: 3 | Total weight: 36 t |
| Booms: | |
| Telescopic boom: 11,4-38 m | Boom sections: 4 |
| Boom luffing up to: 82° in 47 seconds | Boom telescoping: 11,4-38 m in 80 seconds |
| Superlift: - | Intermediate sections: - m |
| Folding jib: 1,4/9/16 m offsettable at angle 0/20/40/60° | |
| Fixed jib: - m offsettable at angle -° | Luffing jib: - m |
| Main boom foot pin horizontal offset X: -3250 mm |
Main boom foot pin vertical offset Y: 2113 mm |
| Max. slewing speed: 1,9 rpm | |
| Max. line speed: 120 m/min | Max. line pull: 45 kN |
| Dimensions: | |
| Total length: 11830 mm | Tail swing: 3530 mm |
| Carrier length: 9168 mm | Width: 2540 mm |
| Outer turning radius : 9050 mm | Inner turning radius: 4700 mm |
| Turning radius boom head: 9990 mm | Turning radius folding jib: 10550 mm |
| Outrigger base: 7151 x 6400 mm | Reduced outrigger base: 7151 x 4500 mm |
| Crawler track width: - mm | Crawler plate width: - mm |
| Drives & Transmission: | |
| Carrier engine: LH D 936 L A6 | Power/Weight-Ratio: 7.50 kW/t |
| Power: 270 kW / 367 PS | Max. torque: 1720 Nm 1000 rpm |
| Transmission: ZF 12-Gang-Schaltgetriebe | Gears: 12+2 (Forward + reverse) |
| Max. speed: 75 km/h | Gradeability: 69,8 % |
| Drive / Steering (standard): 6x4x6 | Drive / Steering (option): 6x6x6 |
| Tyres (standard): 14.00 R25 | Tyres (option): - |
| Superstructure engine: - | |
| Power: - kW / - PS | Max. torque: - Nm at - rpm |
| Counterweight: | |
| Derrick mast: - m | Radius A-frame: - mm |
| Max. counterweight: 9 t | Central ballast (Crawler cranes): - t |
| All crane specifications given are for reference only. This is no sales offer! | Brochure version: 09/08 |