Terex-Demag HC 240 specifications
| Specifications for 80t Terex-Demag Telescopic crane HC 240 | |
| Max. capacity: 80 t at 3 m | Max. loadmoment: - tm |
| Axles: 5 | Total weight: 60 t |
| Booms: | |
| Telescopic boom: 12,7-39 m | Boom sections: 4 |
| Boom luffing up to: 80° in 55 seconds | Boom telescoping: 12,7-39 m in 120 seconds |
| Superlift: - | Intermediate sections: - m |
| Folding jib: 9 m offsettable at angle 0° | |
| Fixed jib: - m offsettable at angle -° | Luffing jib: 9-21 m |
| Main boom foot pin horizontal offset X: -1400 mm |
Main boom foot pin vertical offset Y: - mm |
| Max. slewing speed: 2,5 rpm | |
| Max. line speed: 113 m/min | Max. line pull: 70 kN |
| Dimensions: | |
| Total length: 15545 mm | Tail swing: 3810 mm |
| Carrier length: 12075 mm | Width: 2980 mm |
| Outer turning radius : 16500 mm | Inner turning radius: - mm |
| Turning radius boom head: - mm | Turning radius folding jib: - mm |
| Outrigger base: 6440 x 6500 mm | Reduced outrigger base: - mm |
| Crawler track width: - mm | Crawler plate width: - mm |
| Drives & Transmission: | |
| Carrier engine: KHD - F 10 L 413 F | Power/Weight-Ratio: 3.92 kW/t |
| Power: 235 kW / 320 PS | Max. torque: - Nm - rpm |
| Transmission: Schaltgetriebe | Gears: 6+1 (Forward + reverse) |
| Max. speed: 65 km/h | Gradeability: 28 % |
| Drive / Steering (standard): 10x6x6 | Drive / Steering (option): - |
| Tyres (standard): 14.00-24 PR22 | Tyres (option): - |
| Superstructure engine: KHD F 6 L 912 | |
| Power: 74 kW / 100 PS | Max. torque: - Nm at - rpm |
| Counterweight: | |
| Derrick mast: - m | Radius A-frame: - mm |
| Max. counterweight: 11 t | Central ballast (Crawler cranes): - t |
| All crane specifications given are for reference only. This is no sales offer! | Brochure version: 08/79 |