Terex-Demag HC 200 specifications
| Specifications for 75t Terex-Demag Telescopic crane HC 200 | |
| Max. capacity: 75 t at 3 m | Max. loadmoment: - tm |
| Axles: 5 | Total weight: 60 t |
| Booms: | |
| Telescopic boom: 12,7-39 m | Boom sections: 4 |
| Boom luffing up to: 80° in 90 seconds | Boom telescoping: 12,7-39 m in 125 seconds |
| Superlift: - | Intermediate sections: - m |
| Folding jib: 6 m offsettable at angle 15/38/60° | |
| Fixed jib: - m offsettable at angle -° | Luffing jib: 9-21 m |
| Main boom foot pin horizontal offset X: -2200 mm |
Main boom foot pin vertical offset Y: 3490 mm |
| Max. slewing speed: 2,1 rpm | |
| Max. line speed: 110 m/min | Max. line pull: 62 kN |
| Dimensions: | |
| Total length: 14500 mm | Tail swing: 3500 mm |
| Carrier length: 11100 mm | Width: 2990 mm |
| Outer turning radius : 15000 mm | Inner turning radius: - mm |
| Turning radius boom head: - mm | Turning radius folding jib: - mm |
| Outrigger base: 6250 x 6500 mm | Reduced outrigger base: - mm |
| Crawler track width: - mm | Crawler plate width: - mm |
| Drives & Transmission: | |
| Carrier engine: KHD - F 12 L 413 | Power/Weight-Ratio: 0.00 kW/t |
| Power: - kW / 314 PS | Max. torque: - Nm - rpm |
| Transmission: Schaltgetriebe | Gears: 6+1 (Forward + reverse) |
| Max. speed: 64,8 km/h | Gradeability: 28 % |
| Drive / Steering (standard): 10x6x4 | Drive / Steering (option): - |
| Tyres (standard): 14.00-24 PR22 | Tyres (option): - |
| Superstructure engine: - | |
| Power: - kW / - PS | Max. torque: - Nm at - rpm |
| Counterweight: | |
| Derrick mast: - m | Radius A-frame: - mm |
| Max. counterweight: - t | Central ballast (Crawler cranes): - t |
| All crane specifications given are for reference only. This is no sales offer! | Brochure version: 03/73 |