PPM 380 ATT specifications
| Specifications for 35t PPM Telescopic crane 380 ATT | |
| Max. capacity: 35 t at 3 m | Max. loadmoment: - tm |
| Axles: 2 | Total weight: 24 t |
| Booms: | |
| Telescopic boom: 9,4-30,4 m | Boom sections: 4 |
| Boom luffing up to: 78° in 34 seconds | Boom telescoping: 9,4-30,4 m in 55 seconds |
| Superlift: - | Intermediate sections: - m |
| Folding jib: 7,5/12,5 m offsettable at angle 0/30° | |
| Fixed jib: - m offsettable at angle -° | Luffing jib: - m |
| Main boom foot pin horizontal offset X: -2250 mm |
Main boom foot pin vertical offset Y: - mm |
| Max. slewing speed: 2,45 rpm | |
| Max. line speed: 125 m/min | Max. line pull: 45 kN |
| Dimensions: | |
| Total length: 11990 mm | Tail swing: 3850 mm |
| Carrier length: 8470 mm | Width: 2500 mm |
| Outer turning radius : 11750 mm | Inner turning radius: 6360 mm |
| Turning radius boom head: 9600 mm | Turning radius folding jib: - mm |
| Outrigger base: 6430 x 6080 mm | Reduced outrigger base: - mm |
| Crawler track width: - mm | Crawler plate width: - mm |
| Drives & Transmission: | |
| Carrier engine: Deutz BF 6 L 513 R | Power/Weight-Ratio: 7.38 kW/t |
| Power: 177 kW / 240 PS | Max. torque: - Nm 1500 rpm |
| Transmission: Lastschaltgetriebe | Gears: 6+3 (Forward + reverse) |
| Max. speed: 75 km/h | Gradeability: - % |
| Drive / Steering (standard): 4x4x4 | Drive / Steering (option): - |
| Tyres (standard): 16.00 R25 | Tyres (option): - |
| Superstructure engine: - | |
| Power: - kW / - PS | Max. torque: - Nm at - rpm |
| Counterweight: | |
| Derrick mast: - m | Radius A-frame: - mm |
| Max. counterweight: 5,1 t | Central ballast (Crawler cranes): - t |
| All crane specifications given are for reference only. This is no sales offer! | Brochure version: 09/86 |