Liebherr LTM 1070/1 specifications
Specifications for 70t Liebherr Telescopic crane LTM 1070/1 | |
Max. capacity: 70 t at 3 m | Max. loadmoment: 222 tm |
Axles: 4 | Total weight: 48 t |
Booms: | |
Telescopic boom: 10,6-40 m | Boom sections: 5 |
Boom luffing up to: 83° in 48 seconds | Boom telescoping: 10,6-40 m in 140 seconds |
Superlift: - | Intermediate sections: - m |
Folding jib: 8,4/15,8 m offsettable at angle 0/15/30° | |
Fixed jib: - m offsettable at angle -° | Luffing jib: - m |
Main boom foot pin horizontal offset X: -2150 mm |
Main boom foot pin vertical offset Y: - mm |
Max. slewing speed: 2 rpm | |
Max. line speed: 120 m/min | Max. line pull: 52 kN |
Dimensions: | |
Total length: 12350 mm | Tail swing: 3650 mm |
Carrier length: 9787 mm | Width: 2500 mm |
Outer turning radius : 10400 mm | Inner turning radius: 4980 mm |
Turning radius boom head: 11660 mm | Turning radius folding jib: 12090 mm |
Outrigger base: 8130 x 7200 mm | Reduced outrigger base: 8130 x 5000 mm |
Crawler track width: - mm | Crawler plate width: - mm |
Drives & Transmission: | |
Carrier engine: LH D9406 TI | Power/Weight-Ratio: 6.25 kW/t |
Power: 300 kW / 408 PS | Max. torque: 1700 Nm 1500 rpm |
Transmission: ZF Automatikgetriebe | Gears: 6+2 (Forward + reverse) |
Max. speed: 70 km/h | Gradeability: 60 % |
Drive / Steering (standard): 8x6x8 | Drive / Steering (option): - |
Tyres (standard): 14.00 R25 | Tyres (option): 16.00 R25 |
Superstructure engine: LH D 914 TI | |
Power: 125 kW / 170 PS | Max. torque: 710 Nm at 1400 rpm |
Counterweight: | |
Derrick mast: - m | Radius A-frame: - mm |
Max. counterweight: 13 t | Central ballast (Crawler cranes): - t |
All crane specifications given are for reference only. This is no sales offer! | Brochure version: 05/94 |