Liebherr LTM 1060/1 specifications
| Specifications for 60t Liebherr Telescopic crane LTM 1060/1 | |
| Max. capacity: 60 t at 3 m | Max. loadmoment: 215 tm |
| Axles: 4 | Total weight: 48 t |
| Booms: | |
| Telescopic boom: 10,6-40 m | Boom sections: 5 |
| Boom luffing up to: 83° in 48 seconds | Boom telescoping: 10,6-40 m in 110 seconds |
| Superlift: - | Intermediate sections: - m |
| Folding jib: 8,6/16 m offsettable at angle 0/15/30° | |
| Fixed jib: - m offsettable at angle -° | Luffing jib: - m |
| Main boom foot pin horizontal offset X: -2150 mm |
Main boom foot pin vertical offset Y: - mm |
| Max. slewing speed: 2 rpm | |
| Max. line speed: 120 m/min | Max. line pull: 49 kN |
| Dimensions: | |
| Total length: 12330 mm | Tail swing: 3650 mm |
| Carrier length: 9790 mm | Width: 2400 mm |
| Outer turning radius : 10310 mm | Inner turning radius: 4771 mm |
| Turning radius boom head: 11500 mm | Turning radius folding jib: 12000 mm |
| Outrigger base: 8130 x 7200 mm | Reduced outrigger base: 8130 x 5000 mm |
| Crawler track width: - mm | Crawler plate width: - mm |
| Drives & Transmission: | |
| Carrier engine: LH D 9306 TI | Power/Weight-Ratio: 5.62 kW/t |
| Power: 270 kW / 368 PS | Max. torque: 1560 Nm 1250 rpm |
| Transmission: Allison Automatikgetriebe | Gears: 6+2 (Forward + reverse) |
| Max. speed: 75 km/h | Gradeability: 55 % |
| Drive / Steering (standard): 8x6x8 | Drive / Steering (option): - |
| Tyres (standard): 14.00 R25 | Tyres (option): 16.00 R25 |
| Superstructure engine: - | |
| Power: - kW / - PS | Max. torque: - Nm at - rpm |
| Counterweight: | |
| Derrick mast: - m | Radius A-frame: - mm |
| Max. counterweight: 12,5 t | Central ballast (Crawler cranes): - t |
| All crane specifications given are for reference only. This is no sales offer! | Brochure version: 03/92 |