Liebherr LTF 1045-4.1
| Max. capacity: | 45 to at 2,5 m | Max. loadmoment: | - tm |
| Axles: | 4 | Total weight: | 37 to |
| Boom: | |||
| Telescopic boom: | 10,5-35 m | Boom sections: | 4 |
| Boom luffing up to: | 81° in 45 seconds | Boom extension: | 10,5-35 m in 70 seconds |
| Superlift: | - | Intermediate sections: | - m |
| Folding jib: | 9,5 m ofsettable at angle 0/20/40/60° | ||
| Fixed jib: | - m ofsettable at angle -° | Fly jib: | - m |
| Main boom foot pin horizontal offset X: |
-2350 mm | Main boom foot pin vertical offset Y: |
3618 mm |
| Max. slewing speed: | 2,7 rpm | ||
| Max. line speed: | 120 m/min | Max. line pull: | 34 kN |
| Dimensions: | |||
| Total lenght: | 11395 mm | Tail swing: | 3000 mm |
| Carrier length: | 8829 mm | Width: | 2490 mm |
| Outer turning radius : | 9862 mm | Inner turning radius: | 5255 mm |
| Turning radius boom head: | 10725 mm | Turning radius folding jib: | 11230 mm |
| Outrigger base: | 6420 x 6200 mm | Reduced outrigger base: | 5295 x 4645 mm |
| Track (Crawler cranes): | - mm | Track width (Crawler cranes): | - mm |
| Drives: | |||
| Carrier engine: | Abhängig vom Fahrgestell | Power/Weight-Ratio: | - kW/to |
| Power: | - kW / - PS | Max. torque: | - Nm - rpm |
| Transmission: | - | Gears: | - (Forward + reverse) |
| Max. speed: | - km/h | Gradeability: | - % |
| Drive / Steering (standard): | - | Drive / Steering (option): | - |
| Tyres (standard): | - | Tyres (option): | - |
| Superstructure engine: | LH D 934 S A6 | ||
| Power: | 145 kW / 197 PS | Max. torque: | 950 Nm at 1100 rpm |
| Counterweight: | |||
| Superlift mast: | - m | Radius A-Bock: | - mm |
| Max. counterweight: | 9 to | Superlift counterweight: | - to |
| Counterweight carrier (Crawler cranes): | - to | Central ballast (Crawler cranes): | - to |
| Brochure: | 11/06 | Data sheet: |
 Download
|
| All information given are for reference only. This is no sales offer! | |||
| Publish sales offer or purchase request for this crane model >> | |||