Liebherr LTM 1040-3 specifications
| Specifications for 40t Liebherr Telescopic crane LTM 1040-3 | |
| Max. capacity: 40 t at 3 m | Max. loadmoment: 154 tm |
| Axles: 3 | Total weight: 36 t |
| Booms: | |
| Telescopic boom: 9,5-30 m | Boom sections: 4 |
| Boom luffing up to: 83° in 40 seconds | Boom telescoping: 9,5-30 m in 85 seconds |
| Superlift: - | Intermediate sections: - m |
| Folding jib: 8,3/14,5 m offsettable at angle 0/15/30° | |
| Fixed jib: - m offsettable at angle -° | Luffing jib: - m |
| Main boom foot pin horizontal offset X: -2150 mm |
Main boom foot pin vertical offset Y: - mm |
| Max. slewing speed: 2,1 rpm | |
| Max. line speed: 104 m/min | Max. line pull: 42 kN |
| Dimensions: | |
| Total length: 11000 mm | Tail swing: 3425 mm |
| Carrier length: 8400 mm | Width: 2500 mm |
| Outer turning radius : 10400 mm | Inner turning radius: 5650 mm |
| Turning radius boom head: - mm | Turning radius folding jib: 11850 mm |
| Outrigger base: 6700 x 6200 mm | Reduced outrigger base: 6700 x 4380 mm |
| Crawler track width: - mm | Crawler plate width: - mm |
| Drives & Transmission: | |
| Carrier engine: MB OM 442 | Power/Weight-Ratio: 6.06 kW/t |
| Power: 218 kW / 296 PS | Max. torque: 1100 Nm 1000 rpm |
| Transmission: Lastschalt-Wendegetriebe | Gears: 6+3 (Forward + reverse) |
| Max. speed: 64 km/h | Gradeability: 62 % |
| Drive / Steering (standard): 6x4x6 | Drive / Steering (option): - |
| Tyres (standard): 14.00 R25 | Tyres (option): 16.00 R25 / 20.5 R25 |
| Superstructure engine: - | |
| Power: - kW / - PS | Max. torque: - Nm at - rpm |
| Counterweight: | |
| Derrick mast: - m | Radius A-frame: - mm |
| Max. counterweight: 9 t | Central ballast (Crawler cranes): - t |
| All crane specifications given are for reference only. This is no sales offer! | Brochure version: 11/89 |