Krupp 10 GMT-I specifications
| Specifications for 10t Krupp Industrial crane 10 GMT-I | |
| Max. capacity: 10 t at 0,8 m | Max. loadmoment: - tm |
| Axles: 2 | Total weight: 13,2 t |
| Booms: | |
| Telescopic boom: 4,5-11 m | Boom sections: 3 |
| Boom luffing up to: 73° in 30 seconds | Boom telescoping: 4,5-11 m in 100 seconds |
| Superlift: - | Intermediate sections: - m |
| Folding jib: - m offsettable at angle -° | |
| Fixed jib: - m offsettable at angle -° | Luffing jib: - m |
| Main boom foot pin horizontal offset X: - mm |
Main boom foot pin vertical offset Y: - mm |
| Max. slewing speed: 2 rpm | |
| Max. line speed: 60 m/min | Max. line pull: 27 kN |
| Dimensions: | |
| Total length: 6270 mm | Tail swing: - mm |
| Carrier length: 4240 mm | Width: 2500 mm |
| Outer turning radius : - mm | Inner turning radius: - mm |
| Turning radius boom head: - mm | Turning radius folding jib: - mm |
| Outrigger base: 3800 x 3430 mm | Reduced outrigger base: - mm |
| Crawler track width: - mm | Crawler plate width: - mm |
| Drives & Transmission: | |
| Carrier engine: Deutz F 4 L 912 | Power/Weight-Ratio: 4.23 kW/t |
| Power: 55 kW / 74 PS | Max. torque: - Nm - rpm |
| Transmission: Clark 2-Gang Lastschaltgetriebe | Gears: 2 (Forward + reverse) |
| Max. speed: 24 km/h | Gradeability: 34 % |
| Drive / Steering (standard): 4x2x2 | Drive / Steering (option): - |
| Tyres (standard): 10.00-20 PR16 | Tyres (option): - |
| Superstructure engine: - | |
| Power: - kW / - PS | Max. torque: - Nm at - rpm |
| Counterweight: | |
| Derrick mast: - m | Radius A-frame: - mm |
| Max. counterweight: 1,1 t | Central ballast (Crawler cranes): - t |
| All crane specifications given are for reference only. This is no sales offer! | Brochure version: 10/76 |