Liebherr LTM 1030-2.1 specifications
| Specifications for 35t Liebherr Telescopic crane LTM 1030-2.1 | |
| Max. capacity: 35 t at 3 m | Max. loadmoment: 105 tm |
| Axles: 2 | Total weight: 24 t |
| Booms: | |
| Telescopic boom: 9,2-30 m | Boom sections: 4 |
| Boom luffing up to: 81° in 33 seconds | Boom telescoping: 9,2-30 m in 60 seconds |
| Superlift: - | Intermediate sections: - m |
| Folding jib: 8,6/15 m offsettable at angle 0/20/40° | |
| Fixed jib: - m offsettable at angle -° | Luffing jib: - m |
| Main boom foot pin horizontal offset X: -2300 mm |
Main boom foot pin vertical offset Y: - mm |
| Max. slewing speed: 2,4 rpm | |
| Max. line speed: 120 m/min | Max. line pull: 33 kN |
| Dimensions: | |
| Total length: 10310 mm | Tail swing: 3150 mm |
| Carrier length: 8380 mm | Width: 2500 mm |
| Outer turning radius : 8850 mm | Inner turning radius: 3780 mm |
| Turning radius boom head: 9630 mm | Turning radius folding jib: 10000 mm |
| Outrigger base: 6275 x 6000 mm | Reduced outrigger base: 6275 x 4300 mm |
| Crawler track width: - mm | Crawler plate width: - mm |
| Drives & Transmission: | |
| Carrier engine: MB OM 906 LA | Power/Weight-Ratio: 8.54 kW/t |
| Power: 205 kW / 278 PS | Max. torque: 1100 Nm 1200 rpm |
| Transmission: ZF Lastschaltgetriebe | Gears: 6+3 (Forward + reverse) |
| Max. speed: 75 km/h | Gradeability: 60 % |
| Drive / Steering (standard): 4x4x4 | Drive / Steering (option): - |
| Tyres (standard): 14.00 R25 | Tyres (option): 16.00 R25 |
| Superstructure engine: - | |
| Power: - kW / - PS | Max. torque: - Nm at - rpm |
| Counterweight: | |
| Derrick mast: - m | Radius A-frame: - mm |
| Max. counterweight: 5,5 t | Central ballast (Crawler cranes): - t |
| All crane specifications given are for reference only. This is no sales offer! | Brochure version: 04/97 |