Liebherr LTM 1220-5.1 specifications
| Specifications for 220t Liebherr Telescopic crane LTM 1220-5.1 | |
| Max. capacity: 220 t at 3 m | Max. loadmoment: - tm |
| Axles: 5 | Total weight: 60 t |
| Booms: | |
| Telescopic boom: 13,3-60 m | Boom sections: 6 |
| Boom luffing up to: 82° in 50 seconds | Boom telescoping: 13,3-60 m in 360 seconds |
| Superlift: - | Intermediate sections: 7 m |
| Folding jib: 12,2/22/29/36 m offsettable at angle 0/22,5/45° | |
| Fixed jib: - m offsettable at angle -° | Luffing jib: - m |
| Main boom foot pin horizontal offset X: -2200 mm |
Main boom foot pin vertical offset Y: - mm |
| Max. slewing speed: 1,8 rpm | |
| Max. line speed: 130 m/min | Max. line pull: 105 kN |
| Dimensions: | |
| Total length: 15430 mm | Tail swing: 4850 mm |
| Carrier length: 13280 mm | Width: 3000 mm |
| Outer turning radius : 13120 mm | Inner turning radius: 7800 mm |
| Turning radius boom head: 13890 mm | Turning radius folding jib: - mm |
| Outrigger base: 8875 x 8300 mm | Reduced outrigger base: 8875 x 5500 mm |
| Crawler track width: - mm | Crawler plate width: - mm |
| Drives & Transmission: | |
| Carrier engine: LH D 9408 TI-E | Power/Weight-Ratio: 6.67 kW/t |
| Power: 400 kW / 544 PS | Max. torque: 2500 Nm 1000 rpm |
| Transmission: ZF 16-Gang-Schaltgetriebe | Gears: 16+2 (Forward + reverse) |
| Max. speed: 75 km/h | Gradeability: 62 % |
| Drive / Steering (standard): 10x6x8 | Drive / Steering (option): 10x8x8 |
| Tyres (standard): 14.00 R25 | Tyres (option): 16.00 R25 / 20.5 R25 |
| Superstructure engine: LH D 924 TI-E | |
| Power: 180 kW / 245 PS | Max. torque: 1080 Nm at 1150 rpm |
| Counterweight: | |
| Derrick mast: - m | Radius A-frame: - mm |
| Max. counterweight: 74 t | Central ballast (Crawler cranes): - t |
| All crane specifications given are for reference only. This is no sales offer! | Brochure version: 01/05 |